Monday, April 14, 2014

LP Tank Shield

The LP tank shield was showing quite a bit of rust, so I first removed the regulator cover, which happened to be full of those propane loving yellow sac spiders, and then the shield.  A fair bit of the remaining paint came off with a scraper, but then it was time for a power drill mounted wire brush, followed by a power sander.  A couple of coats of Rust Reformer to hedge against any residue, and then it was time for primer and several coats of Krylon Superbond paint.  New stainless steel mounting & regulator-cover bolts complete the job. 

1 comment: